# EVGA GT 1030 Dual DVI low profile bracket⁠ **URL:** \ **Category:** Help & Support\ **Created:** [August 9, 2026, 5:22am UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387 "2026-08-09T05:22:42Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![jddynasty](https://avatars.discourse-cdn.com/v4/letter/j/ee7513/32.png) [@jddynasty](https://forum.thingiverse.com/u/jddynasty)\ **Post date:** [August 9, 2026, 5:22am UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/1 "2026-08-09T05:22:42Z")
Hi everyone, I recently picked up an EVGA GeForce GT 1030 2GB GDDR5 (Model: 02G-P4-6338-KR). This card has a short/low-profile PCB, but it only came with a full-height bracket, and it features an uncommon Dual DVI-D port output layout. I need to fit this card into a slim desktop case (HP SFF) and am looking for an STL file for a Low Profile (80mm) bracket with two DVI cutout slots. Has anyone designed one for this specific EVGA model, or would anyone be willing to help modify a standard single-DVI GT 1030 LP bracket STL to add the second DVI cutout? Thanks in advance for any assistance or pointers! ---
**Author:** ![ksihota](https://yyz2.discourse-cdn.com/flex032/user_avatar/forum.thingiverse.com/ksihota/32/264_2.png) [@ksihota](https://forum.thingiverse.com/u/ksihota)\ **Post date:** [August 9, 2026, 6:41am UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/2 "2026-08-09T06:41:14Z")
So something like this but it needs 2 DVI port cutout? > **[Low Profile DVI and HDMI Bracket For GT 1030 by FatChicken0707](https://www.thingiverse.com/thing:4888532)** > > I GOT A NEW GPU AND IT IS SO AWESOME!!! it is so much faster than my old one :)the problem is, I have a SFF PC, and my GPU only came with a full form factor bracket.I could just put my gpu in there without a bracket, but that could cause it to fall... Do you have the port layout on the bracket that came with it and you just need the mounting part changed? I’m a visual learner so including some images etc would be helpful. Are the ports offset in some way? Aren’t 2 DVIs too big to fit on a low profile bracket? Or are they Display Ports? ---
**Author:** ![ksihota](https://yyz2.discourse-cdn.com/flex032/user_avatar/forum.thingiverse.com/ksihota/32/264_2.png) [@ksihota](https://forum.thingiverse.com/u/ksihota)\ **Post date:** [August 9, 2026, 7:37pm UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/3 "2026-08-09T19:37:32Z")
This is what a low profile bracket with 2 DVI ports would look like. As you can see its very tight and the lower port appears to be too far down. You would need to provide the exact placement of the ports. HDMI or Display ports are quite a bit smaller so maybe its not 2 DVI ports? Or is there a smaller version of the DVI port? ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/6fbdb9ca8c1b55742ad76b5f2ba3247ca002a187.png) ---
**Author:** ![ksihota](https://yyz2.discourse-cdn.com/flex032/user_avatar/forum.thingiverse.com/ksihota/32/264_2.png) [@ksihota](https://forum.thingiverse.com/u/ksihota)\ **Post date:** [August 9, 2026, 7:49pm UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/4 "2026-08-09T19:49:00Z")
Maybe they sit like this? It looks like its still too tight. Or possibly on a diagonal? ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/ac93e466ddadb56d7d67d48b4e3504c9ddad141c.png) ---
**Author:** ![jonathanpiasecki](https://avatars.discourse-cdn.com/v4/letter/j/ecccb3/32.png) [@jonathanpiasecki](https://forum.thingiverse.com/u/jonathanpiasecki)\ **Post date:** [August 9, 2026, 11:03pm UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/5 "2026-08-09T23:03:11Z")
I believe this is the card in question – > **[EVGA GeForce GT 1030 DirectX 12 02G-P4-6338-KR 2GB 64-Bit GDDR5 PCI Express...](https://www.newegg.com/evga-02g-p4-6338-kr-geforce-gt-1030-2gb-graphics-card-single-fan/p/1FT-001K-00408)** > > Buy EVGA GeForce GT 1030 DirectX 12 02G-P4-6338-KR 2GB 64-Bit GDDR5 PCI Express 3.0 Video Card with fast shipping and top-rated customer service. Once you know, you Newegg! I don’t think a low profile bracket is going to work for it. Here’s a photo of the card ports from the Newegg site and outlines of normal and low-profile brackets. ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/663d7a5f02dae0be233b0b40665e2668affcd74e.png) Have looked at the various model numbers for this card and I don’t think yours is a low-profile board. Here are the variants and model numbers I can find: - EVGA GeForce GT 1030 SC Single Slot - 02G-P4-6338-KR (the one you say you have) Full-height bracket, single-slot active/cooling layout, two Single-Link DVI-D ports. - EVGA GeForce GT 1030 SC Low Profile - 02G-P4-6333-KR Low-profile bracket, active fan cooling, 1.5-slot width, one HDMI 2.0b port and one Single-Link DVI-D port. - EVGA GeForce GT 1030 SC Passive Low Profile - 02G-P4-6332-KR Low-profile bracket, completely silent passive heatsink, 1.5-slot width, one HDMI 2.0b port and one Single-Link DVI-D port. ---
**Author:** ![ksihota](https://yyz2.discourse-cdn.com/flex032/user_avatar/forum.thingiverse.com/ksihota/32/264_2.png) [@ksihota](https://forum.thingiverse.com/u/ksihota)\ **Post date:** [August 10, 2026, 12:49am UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/6 "2026-08-10T00:49:19Z")
> [@jddynasty](#): > > it features an uncommon Dual DVI-D port output layout. Double, using 2 pci slots like this? ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/b2bf58996c1da91e9857f0294a2fc0f31214906d.png) ---
**Author:** ![jonathanpiasecki](https://avatars.discourse-cdn.com/v4/letter/j/ecccb3/32.png) [@jonathanpiasecki](https://forum.thingiverse.com/u/jonathanpiasecki)\ **Post date:** [August 10, 2026, 5:42pm UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/7 "2026-08-10T17:42:34Z")
@ksihota This would be an interesting option. ![Gemini_Generated_Image_djvhkgdjvhkgdjvh](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/a86bbafa8d7864b0818077605a440bec491eab3f.jpeg) ---
**Author:** ![ksihota](https://yyz2.discourse-cdn.com/flex032/user_avatar/forum.thingiverse.com/ksihota/32/264_2.png) [@ksihota](https://forum.thingiverse.com/u/ksihota)\ **Post date:** [August 10, 2026, 5:52pm UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/8 "2026-08-10T17:52:02Z")
LOL yeah, it would be. Might be hard to fit the port onto a PCB in that direction. I guess you could create a daughter board that held them. I don’t think I would want to have to design the setup though. Or the ports could be attached to the bracket with cables instead of directly to the PCB I am interested in seeing a photo of the uncommon layout from the OP 🤔 ---
**Author:** ![jonathanpiasecki](https://avatars.discourse-cdn.com/v4/letter/j/ecccb3/32.png) [@jonathanpiasecki](https://forum.thingiverse.com/u/jonathanpiasecki)\ **Post date:** [August 10, 2026, 6:03pm UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/9 "2026-08-10T18:03:05Z")
I think “uncommon” was just a poor choice of words. I think the OP meant that most boards in this model range have a different set of ports - the one the OP has is the only one to have two DVI-D ports, while the others have an HDMI and a DVI-D. See my post above where I list the three models in this range and their bracket sizes and ports. The photo showing the mounting bracket with two ports is a photo of the ports from the model that the OP has. ---
**Author:** ![ksihota](https://yyz2.discourse-cdn.com/flex032/user_avatar/forum.thingiverse.com/ksihota/32/264_2.png) [@ksihota](https://forum.thingiverse.com/u/ksihota)\ **Post date:** [August 10, 2026, 6:38pm UTC](https://forum.thingiverse.com/t/evga-gt-1030-dual-dvi-low-profile-bracket/387/10 "2026-08-10T18:38:39Z")
Yeah, I figured it required a full height bracket but I thought that maybe there are different layouts in different countries. I always assume that what is available in my country is what is available everywhere but that is not necessarily true. I suppose that if the card actually fits inside a low profile case a special bracket could be made but without real measurements its pretty hard to do. Most of the hardware stuff I deal with is on laptops or full sized servers so I can’t even remember what regular desktop machines are like inside.