# Would a kind person make me 6 of these small objects please?

**URL:** <https://forum.thingiverse.com/t/would-a-kind-person-make-me-6-of-these-small-objects-please/216>\
**Category:** General\
**Created:** [June 13, 2026, 2:41am UTC](https://forum.thingiverse.com/t/would-a-kind-person-make-me-6-of-these-small-objects-please/216 "2026-06-13T02:41:12Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![ksihota](https://yyz2.discourse-cdn.com/flex032/user_avatar/forum.thingiverse.com/ksihota/32/264_2.png) [@ksihota](https://forum.thingiverse.com/u/ksihota)\
**Post date:** [June 13, 2026, 11:52pm UTC](https://forum.thingiverse.com/t/would-a-kind-person-make-me-6-of-these-small-objects-please/216/8 "2026-06-13T23:52:43Z")

</div>

Here are some photos with measurements of a printed version.

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/2b7fe4e3dac37848f27be87dba4372e4c3211088.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/a411909c6a7f5c29fade1c4884f9177dbce5f527.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/8f5a9b3f7ff93c01e113a0a8bb970e7a2335fcdc.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/c3404b89dc1c6637a8b972fe937d74856d4ba1f7.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/a3a8eb14556551418848a997a28795fd5419f369.jpeg)

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/a907642da9ea44dd37f0a01d32af17574f6fba9f.jpeg)

I was wondering why my dagger end was 2.74 mm instead of 2 in my actual print until I realized that I was printing in PETG with the fan off and that part was printed over supports. After a little cleanup and some sanding to smooth the surfaces it was exactly 2mm thick. You can see the sagging on the bridging near the top on that side cutout. Those cutouts aren’t necessary but were in the original vacuum moulded parts. The print would be cleaner without them.

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/thingiverse/original/1X/73449be5d92bc06d3edbdcd12d2ee7054b7bb93e.jpeg)

---

_[View the full topic](https://forum.thingiverse.com/t/would-a-kind-person-make-me-6-of-these-small-objects-please/216)._